My final hybrid design

Below is my fiinal human hybrid design which is a crocodile. Firstly I began by applying glue to the back of my silicon moulds and I had to wait approximately 5 minutes for this to dry until it turned clear. I then stuck my moulds onto my models body, the biggest one I placed on her back and the other onto her left hand. I then blended the edges in using alcohol and a cotton bud which took me quite a while to do. After this I started to apply the make-up over and around the mould. I mixed a variety of colours together using my Supracolor pallet, I used a mix of green, black and red to get a variety of different shades of green to make it look more realistic and I did this on the back and hand. I then applied latex to the back and also on some parts of the right side of the face to create a different kind of texture for a crocodile and picked at it using special effects tools and this made it look very effective. I finished by colouring the face, neck and ears in with my mixed colours from my Supracolor pallet so it all blended in well. I created my Hybrid so my models left hand was coming over her right shoulder and her head slightly turned. I feel the outcome was very successful, I did struggle in some parts, for example, when mixing the colours I found it a bit hard to get the desired colour at first but once I managed to overcome this I was fine. I also struggled slightly when applying the latex I didn't feel the texture was looking as I had planned, however I kept going until I was happy with what I had created. I placed my silicon moulds on different parts of the body and placed latex across the face and back so you could see different parts of the crocodile coming through on the human to make it look more effective. I also wanted to use a contact lense on my model which I thought would have looked cool, however she was unable to place this into her eye so I wasn't able to use it. By the time I had completed the Hybrid I can say I was very pleased with the end result.