After I had pealed the prosthetic from the silicone mould using powder, I then applied prosade which is an adhesive glue to the area and the back of the wound and then had to wait around 5 minutes for the glue to go transparent before I could apply it to the skin .
After the prosade had gone transparent on both the wound and the area of skin I then applied the wound to the skin applying pressure to the area to make sure the glue bonded and it stuck well. Next I began melting the access edges away using a cotton bud and alcohol which took me quite a while to do.
Once the edges were melted away I then began applying colours from the supracolour pallet and also the Neil Gorton alcohol activated pallet.Once I was happy with my mould I then used a camera to take photos of my wound.
No comments:
Post a Comment